Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Aldine, TX
Gate access control and gate parts repair in Aldine most often come down to two local realities: unincorporated Harris County permitting that homeowners never got a straight answer on, and beefy aftermarket ornamental iron gates that were never part of the original 1960s ranch-house plan. We work on those gates daily, and we price every job in writing before any tool comes off the truck. Call (346) 423-6136 when a gate stops opening, a keypad stops accepting codes, or a wrought-iron hinge pulls loose from a leaning post.
Why Aldine Homes Are Different
Aldine is unincorporated Harris County, not a city, so gate work is governed by county regulations rather than any municipal code. That distinction matters because a surprising number of Aldine homeowners believe a city permit office exists somewhere, and only learn otherwise when a real estate transaction triggers an inspection. The housing stock is modest brick ranch and wood-frame homes built mostly from the 1960s through the 1980s, many of which had ornamental iron driveway gates added as aftermarket security upgrades. Those gates sit on concrete footings poured into Houston’s expansive Beaumont clay, which swells after heavy rain and shrinks in drought, slowly heaving posts and cracking the concrete around them. Add the recurring flood events that submerge low-mounted gate operators and corrode control boards, and Aldine gate work on any given street often combines county permitting questions, iron fatigue, and flood-damaged motor assemblies all in the same afternoon.
Our Main Aldine Services
Most Aldine calls start with one of three problems: a gate that stopped opening, a gate that needs to be replaced, or a motor that no longer responds. Each has its own page with the full breakdown.
Gate Repair in Aldine
A leaning post on Beaumont clay, a snapped hinge weld, a gate dragging on the driveway after a storm. Most Aldine gate repairs trace to the soil, the water, or the original aftermarket installation. We diagnose the full assembly before quoting, and you get the written price before the repair starts. Full details on the Gate Repair in Aldine page.
Gate Installation in Aldine
New ornamental iron gates in Aldine usually mean dealing with Harris County’s unincorporated area office for permits and setback confirmations, plus footings deep enough to handle expanding clay. We coordinate the paperwork and pour posts that stay put. The Gate Installation in Aldine page covers measurements, materials, and county requirements.
Gate Motor & Opener in Aldine
Flood-damaged opener boards and misaligned limit switches are common in Aldine, where ground-level motor mounts sit below the water line in heavy storms. We service nine major automation brands and mount replacements above grade whenever the site allows. See the Gate Motor & Opener in Aldine page for motor-specific pricing and options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Aldine
Gate access control in Aldine means entry systems on gates that were usually added as aftermarket security to homes built decades before automated gate hardware existed. Flood exposure and Beaumont clay movement cause keypads, card readers, and intercom wiring to fail earlier than they would in drier, more stable soil. Our Gate Access Control service covers every component from the keypad on the post to the receiver in the motor, with a written price before work starts.
Keypad Entry
Signs you need it
The keypad works sporadically, accepts some codes but not others, or shows moisture inside the faceplate.
What it costs in Aldine
Replacement keypad entry systems typically run $250 to $900 depending on the keypad model and whether the wiring to the opener has to be replaced.
How we do it
We test the existing wiring for continuity, replace the keypad and any corroded splices, program all codes in front of you, and photograph the final settings for the job record.
Video Intercom
Signs you need it
The video feed is dead, the audio cuts out, or the call button rings but never connects to the inside monitor.
What it costs in Aldine
Video intercom installations and repairs typically run $750 to $2,500 depending on the system, the camera type, and whether new cable has to be pulled to the house.
How we do it
We trace the cable path from the gate station to the indoor monitor, replace what is failed, set the camera angle and audio levels, and leave you a photo log of the entire install.
What Gate Access Control Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Keypad entry system replacement | $250 - $900 |
| Video intercom installation | $750 - $2,500 |
| Remote control or receiver repair | $130 - $450 |
Can you repair a keypad that is full of water?
Sometimes. If the circuit board is not corroded, we can dry and reseal the housing. If the board is gone, a replacement keypad is the honest call. We will show you the opened unit before you pay for anything.
Does access control installation require a permit in Aldine?
Low-voltage access control work generally does not require a county permit, but any new post or footing for a gate station might. We confirm what Harris County actually requires before we start. Call (346) 423-6136 to talk through your setup.
Gate Parts & Welding in Aldine
Gate parts and welding in Aldine are usually about iron gates that have been leaning, dragging, or rusting for years on expanding Beaumont clay. Hinges pull out, posts heave, and the bottom rail rusts through from constant splash-back after storms. Our Gate Parts & Welding work keeps the original gate in service with new steel where it counts.
Hinge Replacement
Signs you need it
The gate sags on the latch side, scrapes the driveway, or the hinge pin has worn an oval into the post bracket.
What it costs in Aldine
Hinge replacement typically runs $85 to $180 per hinge, depending on the hinge type and whether the post plate needs grinding and re-anchoring.
How we do it
We cut off the old hinge, grind the post clean, weld the new hinge at the correct spacing, and photograph the weld before painting.
Post Replacement
Signs you need it
The post is visibly leaning, the concrete footing is cracked around the base, or the gate will not hold an alignment no matter how many times the hinges are adjusted.
What it costs in Aldine
Post replacement typically runs $450 to $1,400 depending on post size, demolition, and the footing depth needed for local soil.
How we do it
We pull the old post and footing, pour a new footing sized for the clay movement Aldine sees, set the post, and confirm level and plumb in two directions.
What Gate Parts & Welding Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Hinge replacement | $85 - $180 per hinge |
| Post replacement | $450 - $1,400 |
| Gate rollers | $75 - $250 per set |
Can you weld a broken gate on site?
Yes. Most residential gate welds are done on the truck with a mobile stick or flux-core setup, and the weld is primed and painted the same visit. Call (346) 423-6136 for a written quote on your specific break.
How long does a welded repair last?
A properly prepared and painted weld on a residential gate typically lasts 10 to 20 years, assuming the steel around it is sound. We show you the bare metal before we weld so you know what the joint is actually sitting on.
Brands We Service in Aldine
We service Linear, Viking, Ghost Controls, and DoorKing automation, among five other major brands, so the motor already on your Aldine gate is almost certainly one we know. We carry common parts locally and can usually source uncommon boards within two business days. See our brands for the full list.
Pricing for Gate Repair in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Keypad entry system replacement | $250 - $900 |
| Video intercom installation | $750 - $2,500 |
| Remote control or receiver repair | $130 - $450 |
| Hinge replacement | $85 - $180 per hinge |
| Post replacement | $450 - $1,400 |
| Gate rollers | $75 - $250 per set |
| Weld repair, minor crack | $120 - $350 |
| Full gate frame weld rehabilitation | $350 - $950 |
Aldine prices push higher when the gate footing has heaved out of level and the post work has to happen before any hinge or roller gets touched, and when flood corrosion has spread through the control wiring along with the component that failed first. Every quote is written and agreed before work starts, no exceptions.
Neighborhoods We Serve in Aldine
We work across all of Aldine, including these representative neighborhoods. Our typical response time for a call placed before noon is same-day or next-morning dispatch.
- Hidden Valley
- Scenic Woods
- Forest Manor
- Eastex-Jensen area
- Greenwood Village
Service Area - Cities Near Aldine
Beyond Aldine, we regularly serve Humble, TX, Atascocita, TX, Spring, TX, and Cloverleaf, TX. If you are just outside Aldine and unsure whether we cover your street, call and ask. A live person answers 24/7.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aldine
You may. Aldine is unincorporated Harris County, so gate permits run through the county’s unincorporated area office, not a city hall. New fence or gate posts and footings may need sign-off; most repairs and low-voltage access control work do not. We confirm before work begins so your property does not fail a future inspection.
Most Aldine calls received before noon get same-day or next-morning dispatch. Calls after noon usually get next-morning service. We do not route through a call center; a live person answers 24/7 and can often tell you on that first call when a technician can be there.
Cut power to the opener at the breaker or the disconnect switch and call us before trying to operate the gate. Water inside the motor or the control board can cause a short that damages the board further, and a gate that has moved in wet soil can bind against the posts. Call (346) 423-6136 and we will walk you through the first check.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.