Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Houston, TX
Gate access control work in Houston usually means one of two things: a keypad or remote that stopped talking to the operator, or a gate that needs new metal because the old metal rusted through. The city’s humidity sits between 75 and 90 percent most of the year, which accelerates corrosion on hinges, latch plates, and control boards faster than nearly any other Texas market. We document every job with photos and hand you a written price before work begins. Call (346) 423-6136 for a free estimate.
Why Houston Homes Are Different
Houston’s expansive black clay, the same Vertisol soil that shifts foundations across the city, heaves and contracts gate posts through every wet-dry cycle. A gate that closes cleanly in May can drag the driveway by August, or gap at the latch after a heavy bayou flood. Homes in Meyerland, Clear Lake, and the Energy Corridor sit on this soil, and post movement is the single most common call we run. Add in the flat topography and recurring tropical rainfall that pushes water into operator housings near Buffalo, Brays, and White Oak bayous, and Houston gate repair becomes a geology and hydrology problem as much as a mechanical one. Wood-framed gates from the city’s 1970s-to-1990s build-out are also hitting end of life in constant humidity, while HOA-governed communities like Cinco Ranch and Kingwood require repair choices that match existing ornamental iron or aluminum.
Our Main Houston Services
Most Houston homeowners call us first about one of these three problems: a gate that won’t close, a gate that’s rotted or sagging past repair, or a motor that works intermittently or not at all.
Gate Repair in Houston
We handle everything from welded steel frame repairs to latch and hinge replacement, sag correction, and full gate realignment. Houston humidity rusts steel hinges quickly, so we often replace rusted hardware with galvanized or stainless parts rather than reusing what failed. Our Gate Repair in Houston page covers the full scope.
Gate Installation in Houston
New gate installations in Houston require deeper concrete footings than in drier Texas cities because the black clay swells when saturated. We dig deeper, add drainage collar gravel, and set posts for long-term stability. HOA color and design requirements are common in master-planned communities. See Gate Installation in Houston for details.
Gate Motor & Opener in Houston
Low-lying lots near Buffalo and Brays bayous flood regularly, and operator control boards are often the casualty. We replace flooded boards, rewire underground runs, and set limit switches so the gate travels fully without slamming. Our Gate Motor & Opener in Houston page explains the repair process brand by brand.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Houston
Gate access control in Houston covers the keypads, remotes, phone systems, card readers, and intercoms that let you in while keeping everyone else out. In flood-prone neighborhoods along the bayous, we see control boards and keypad wiring short out after heavy rain more often than anywhere else in Texas. Our Gate Access Control work follows the same rule as every job: written price first, photo record when we leave.
Keypad Entry
Signs you need it
The keypad beeps but won’t release the gate, or certain codes stopped working after a rainstorm.
What it costs in Houston
Keypad replacement typically runs $225 to $350 per unit, and a new buried cable run from the keypad to the control board is $180 to $350.
How we do it
We trace the keypad wiring, replace the damaged unit or cable section, reprogram entry codes, and photograph the new wiring connections.
Phone Entry
Signs you need it
Visitors press your entry code and you hear nothing, or the call rings but the gate won’t open from the phone keypress.
What it costs in Houston
Installing a complete phone entry system for one gate runs $1,500 to $2,500, while a repair on an existing phone entry board is $380 to $480.
How we do it
We verify the registered phone line, replace the failing relay or board, set the entry relay timing, and photograph the final wiring configuration.
What Gate Access Control Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Keypad replacement | $225 - $350 |
| Phone entry system (new, one gate) | $1,500 - $2,500 |
| Access control board repair | $380 - $480 |
Can you repair a keypad that flooded during a Houston storm?
Usually yes, if the keypad was not submerged for long. We replace the damaged board and reseal the housing, then photograph the repair so you have a record for insurance or warranty claims. Call (346) 423-6136 for a free estimate.
Do you repair phone entry systems in Houston HOA communities?
Yes, we service phone entry, card readers, and video intercoms in gated subdivisions across Houston. We match the system already on the property rather than pushing a complete replacement. Call (346) 423-6136 for a written quote.
Gate Parts & Welding in Houston
Gate parts and welding in Houston often starts with rusted hinges and ends with a post replacement because the soil moved. We do structural welding, hinge swaps, roller jobs, and post setting for gates that have sagged past what a hardware fix can handle. Our Gate Parts & Welding work includes a photo record of every joint and part number we touch.
Hinge Replacement
Signs you need it
The gate droops at the latch side, scrapes the driveway, or swings open on its own.
What it costs in Houston
Hinge replacement typically costs $260 to $380 for two hinges, including new hardware and alignment.
How we do it
We cut off the rusted hinges, weld or bolt in new galvanized or stainless replacements, and adjust the gate so it swings level.
Post Replacement
Signs you need it
The gate post leans visibly, the gate gap widens at the top, or fresh caulk cracks around the base after a rainy month.
What it costs in Houston
Post replacement runs $500 to $700 per post, which includes excavation, a deeper concrete footing with gravel drainage collar, and resetting the gate.
How we do it
We saw out the old post, dig a sufficiently deep hole in the clay, set the new post with drainage gravel, and rehang the gate once the concrete reaches adequate strength.
What Gate Parts & Welding Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Hinge replacement | $260 - $380 |
| Post replacement | $500 - $700 |
| Custom welding (cracked frame or gate) | $150 - $400 |
Do you weld ornamental iron gates in place or remove them?
It depends on the crack location and access. Small cracks can be welded in place; larger structural failures usually mean we remove the gate leaf, weld it on a flat surface, and rehang it. Call (346) 423-6136 for a free estimate.
Can you replace a gate post without damaging my driveway in Houston?
Yes. We use a core drill or careful saw-cut method around the post, leaving the surrounding driveway intact, then set the new post in the same footprint. The written quote includes the exact excavation method before we start.
Brands We Service in Houston
We service LiftMaster, FAAC, and Elite operators regularly in Houston, and we carry common replacement parts for these brands in the truck. Most keypad and control board repairs are completed the same visit once we see the unit. Learn more about our brands coverage.
Pricing for Gate Repair in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Keypad replacement | $225 - $350 |
| Buried cable run (keypad to board) | $180 - $350 |
| Phone entry system (new, one gate) | $1,500 - $2,500 |
| Access control board repair | $380 - $480 |
| Hinge replacement | $260 - $380 |
| Post replacement | $500 - $700 |
| Custom welding | $150 - $400 |
What pushes a Houston job higher: operators that took bayou floodwater and need a full board swap, posts set too shallow in shifting clay that now need complete resetting, and ornamental iron gates with rust damage that requires cutting out and rewelding more sections than the original quote assumed. The written price you approve before work starts stays the price you pay.
Neighborhoods We Serve in Houston
We run gate repair and access control calls throughout Houston every week, from the Energy Corridor to Clear Lake and from Meyerland to Kingwood. Most areas can be reached the same day for urgent gate failures.
- Meyerland
- Clear Lake
- Energy Corridor
- Kingwood
- Cinco Ranch
Service Area - Cities Near Houston
Our Houston crews also cover nearby communities, so gate repairs in Galena Park, TX, Channelview, TX, Humble, TX, and Highlands, TX get the same written price and photo record as a job inside the city itself.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
A standard gate replacement on existing posts typically requires no permit, but new driveway gates with operators in HOA communities often need design approval first. We can tell you what the HOA asked for in your neighborhood, or bring the HOA’s requirements to us and we’ll match them, including the documented photo record every job includes.
We dispatch across Houston and can usually get a technician to you the same day. A live person answers the phone 24/7 at (346) 423-6136, and we’ll give you a scheduled arrival before you hang up. There’s no voicemail loop and no callback window to wait through.
The black clay soil moves more here than almost anywhere else in Texas, so post alignment and gate sag are the dominant repair calls. Flooded operator boards near the bayous are the second. We set posts with deeper footings and better drainage to account for both, and we document every step so the next technician never has to guess what was done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.