Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Highlands, TX
Most gate failures in Highlands come down to two things: the corrosive air off the Ship Channel and the low, wet ground along the San Jacinto River. Ranch-style pipe gates on acreage lots, ornamental swing gates on mid-century homes, and slide gates across long driveways all fail differently here than they do twenty miles inland. We fix all of it, write the price down before we touch a tool, and leave you a photo record of every adjustment. Call (346) 423-6136 when the gate stops doing what it should.
Why Highlands Homes Are Different
Highlands sits inside the Houston Ship Channel petrochemical corridor. Airborne sulfur compounds from nearby refineries settle on exposed metal, and the subtropical humidity keeps that chemistry working year-round. A powder-coated gate that looks new in Katy after ten years will show pitting and rust bloom in Highlands within four to six. We specify marine-grade hardware and stainless fasteners on residential gates here, not because it’s an upsell but because standard galvanized parts simply don’t hold up.
The terrain piles on. Much of Highlands lies in the San Jacinto floodplain, and during heavy rain seasons standing water reaches operators, control boards, and underground conduit runs. Harvey submerged entire gate systems in 2017. Since then, we see a steady pattern: motors that work until the first prolonged rain, wiring that tests fine until conduit fills with silt, post footings that heave after saturation. Add the acreage lots with horses and cattle – pipe gates, long slide gates, fence-line driveway gates – and you get a repair profile that doesn’t look like the rest of Harris County. It’s why we approach Highlands jobs the way we do: marine-grade on the metal, elevated or sealed on the electrics, and documentation on everything.
Our Main Highlands Services
Most calls in Highlands fall into three buckets: broken gates that need repair now, new gates built for floodplain conditions, and motors that gave out after one storm too many. Here’s what each job looks like on the ground here.
Gate Repair in Highlands
A sagging swing gate on a ranch entrance, a slide gate that grinds halfway and stops, a hinge torn from a post by flood debris – that’s the daily reality in Highlands. We diagnose on the first visit, price in writing, and fix the root cause rather than the symptom. On pipe gates, that often means re-setting a post and re-welding a hinge bracket. On ornamental gates, it’s usually a hinge replacement plus a latch realignment. Gate Repair in Highlands covers the full range, from a single broken weld to a flooded operator rebuild.
Gate Installation in Highlands
New gates in Highlands should start with drainage and corrosion in mind. We set posts deeper than standard in the soft alluvial soil, use stainless or marine-grade hardware throughout, and run conduit above the expected standing-water line where the lot allows. Whether it’s a ranch pipe gate across a pasture entrance or an ornamental iron gate at a driveway, the spec matters more here than in drier suburbs. Gate Installation in Highlands walks through materials, motor pairing, and the written price before anything gets ordered.
Gate Motor & Opener in Highlands
Floodwater and humidity kill gate electronics faster in Highlands than almost anywhere in the metro. We replace control boards, re-seal operator housings, set new limit switches, and convert flooded AC systems to sealed DC where it makes sense. LiftMaster, FAAC, Elite, Mighty Mule – we work on whatever motor is already on the property. Gate Motor & Opener in Highlands explains replacement ranges and what flooding does to each type.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Highlands
Highlands has a lot of acreage, a lot of long driveways, and a real mix of ranch fences and residential ornamental gates. Access control here isn’t a luxury add-on; it’s how you let the farrier in without leaving the house, how you stop a loose horse from following a visitor out, and how you know who came through the gate after dark. We work on pipeline-adjacent properties, horse lots, and single-family homes in Highlands, and every job gets the same treatment under Gate Access Control: written scope, written price, photographed wiring, and a documented limit-setting before we leave.
Keypad Entry
Signs you need it
You’re walking out to the gate in the rain to punch a code on a faded, unreadable pad, or the keypad only works when you press each button twice.
What it costs in Highlands
A new keypad installed on an existing gate in Highlands typically runs $275-$550, depending on whether we’re reusing the existing wire or pulling a new home run through conduit.
How we do it
We mount the keypad in a location that works with your gate’s swing or slide arc, terminate connections with sealed spade connectors, program codes, and photograph the finished wiring inside the operator box.
Video Intercom
Signs you need it
You can’t see who’s at the gate from the house, or the old intercom’s video feed died and you’re walking out to every delivery.
What it costs in Highlands
A video intercom system with a gate release button runs roughly $1,450-$3,100 installed in Highlands, depending on whether you need a wired monitor in the house or a mobile-app-only setup.
How we do it
We mount the camera unit at gate-post height, run Cat6 or coax back to the house (or set up a wireless bridge on larger lots), configure the app for whoever lives at the property, and test the release relay before we leave.
What Gate Access Control Costs in Highlands
| Item | Typical range in Highlands |
|---|---|
| Keypad entry system installed | $275-$550 |
| Remote control receiver and two remotes | $175-$425 |
| Video intercom with gate release | $1,450-$3,100 |
Can you use my existing keypad wiring?
Usually yes, provided the original wire is not corroded. In Highlands, we test the run with a multimeter first because flood-damaged conduit often leaves conductors oxidized inside intact insulation. If it tests clean, we reuse it and save the pull.
Will a video intercom work on a long Highlands driveway?
Yes. For driveways over roughly 250 feet, we typically use a wireless point-to-point bridge or fiber rather than long copper runs. The system you pick depends on the gate location, but we’ve installed app-based intercoms on acreage lots throughout Highlands. Call (346) 423-6136 for a site assessment.
Gate Parts & Welding in Highlands
Corrosion is the main reason parts fail in Highlands, and welding is the repair that brings them back. A rusted hinge barrel, a snapped post ear, a cracked rail on a long slide gate – these are the jobs we see every week on ranch entrances and residential driveways alike. Under Gate Parts & Welding, every weld we make and every part we hang is done to outlast the air here, not just pass a visual check.
Hinge Replacement
Signs you need it
The gate drags on the latch side, leans noticeably, or the hinge pin has worn thin enough to rattle when the wind picks up.
What it costs in Highlands
Hinge replacement on an ornamental or pipe gate in Highlands runs $90-$260 per hinge, including shimming and realignment while the gate is off its pins.
How we do it
We support the gate, cut or unbolt the old hinges, position the new ones with the correct reveal, weld or bolt them in, and photograph the final alignment with a level on the rail.
Post Replacement
Signs you need it
The post is leaning backward from the weight of the gate, or you can see rust weeping from the base where floodwater sat longest.
What it costs in Highlands
Post replacement for a typical swing gate in Highlands runs $240-$600 per post, depending on depth, concrete volume, and whether the old post is set in clay or alluvial fill.
How we do it
We dig out the old footing (or cut the post at grade and leave the concrete if it’s sound), set the new post plumb and deeper than the frost line plus flood heave margin, and re-hang the gate with fresh hardware.
What Gate Parts & Welding Costs in Highlands
| Item | Typical range in Highlands |
|---|---|
| Hinge replacement (per hinge) | $90-$260 |
| Gate roller replacement (pair) | $130-$310 |
| Post replacement (swing gate) | $240-$600 |
Can you weld rusty gate frames, or do they need replacing?
Often we can. We grind back to clean steel, check the wall thickness with a gauge, and weld only if there’s enough metal left to hold. When the frame is too thin, we say so rather than laying weld over rot. Estimates are free, so call (346) 423-6136.
Do you use stainless steel on gate repairs in Highlands?
On hardware, yes. We default to stainless fasteners, marine-grade hinges, and sealed steel wherever the original part is failing from corrosion. It costs a little more up front but survives the Ship Channel air far longer than big-box galvanized parts.
Brands We Service in Highlands
We service LiftMaster, FAAC, Elite, and Mighty Mule motors along with other of the brands we carry parts for. Our trucks are stocked with common control boards, remotes, and safety-beam hardware, so most Highlands jobs finish on the first visit rather than waiting on a shipped part.
Pricing for Gate Repair in Highlands, TX
| Service | Typical range in Highlands |
|---|---|
| Hinge replacement (per hinge) | $90-$260 |
| Gate roller replacement (pair) | $130-$310 |
| Post replacement (swing gate) | $240-$600 |
| Keypad entry system installed | $275-$550 |
| Remote control receiver and two remotes | $175-$425 |
| Video intercom with gate release | $1,450-$3,100 |
What pushes a Highlands quote toward the top of a range is almost always what’s underground: soft alluvial soil that needs a deeper footing, a conduit run filled with silt from the last flood, or a post base that has to be dug past old flood debris. Every price we hand you is written before work starts. No surprises on the invoice, no call to ask for a price.
Neighborhoods We Serve in Highlands
We work all of Highlands and the surrounding roads along the San Jacinto corridor, from the older residential streets near the water treatment plant out to the acreage lots on the east side of town. Response time in the area is typically 60-90 minutes for emergency gate failures.
- Highlands proper along Highland Woods and River Terrace
- Battleground Road corridor
- Sites along FM 2100 and the south side of the river
- Acreage lots east of Lake Houston
- Streets off Thompson Road and the railroad crossing
Service Area - Cities Near Highlands
Our Highlands crews also cover the surrounding communities along the Ship Channel corridor and the northeast metro. The same written pricing, the same photo documentation, and the same 365-Day Done Right Promise apply in Channelview, TX, Galena Park, TX, Houston, TX, and Humble, TX.
Serving Highlands, TX - Our Local Coverage Area
We’re based in the Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Highlands
For an emergency gate failure – a gate stuck open or blocking a driveway – we typically arrive in Highlands within 60-90 minutes. A live person answers the phone 24/7, so you’ll get a named technician and an ETA right when you call, not a callback window.
Highlands is unincorporated Harris County, so there’s no city-level gate permit. For gate work tied to a driveway adjacent to a county road or involving an electric power run, county permitting rules can apply, and we handle the paperwork so you don’t have to track it down.
Yes. A large share of our Highlands work is on ranch-style pipe gates, horse-lot entrances, and long driveway slide gates on acreage. The same technician who welds a cracked frame on an ornamental gate is comfortable with cattle-gate post depth and span calculations.
When your gate stops working in Highlands, call (346) 423-6136. We’ll price the job in writing before any work starts, fix what’s broken, and leave you a photo record of exactly what we found and what we did. Estimates are free, and a live person answers the phone at any hour.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highlands Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.